|
Back
Marshall
2266 Vintage Modern Guitar Amp Head
The Marshall 2266 Vintage Modern head is an all-valve single
channel amplifier with a choice of two dynamic ranges
selectable by a footswitch.
The Low range exemplifies the performance you have come to expect
from a stock vintage Marshall amplifier in terms of tone and
available gain. The High range adds an extra preamp valve into the
signal path, facilitating those classic hard rock tones of the
seventies. Add to this the ability to dynamically interface with
your instrument's Volume and Tone controls and the experience
translates into a truly expressive and organic feel.
Two
frequency selective Pre-amp volumes (gains)-Body and Detail-
facilitate greater flexibility of tonal shaping for individual
guitars and styles while the power amplifier is heavily based on
the first Marshall amplifiers with four KT66 output valves yielding
that substantial fat and smooth tone. A Mid Boost switch on the
front panel fattens the tone even more while a traditional Marshall
tone control circuit enables fine tuning of your sound.
VINTAGE and
MODERN!-
These are two words that don't normally sit comfortably together
unless you're talking guitar amplification. The
Vintage aspect of course, the tone-fat, smooth,
classic and dynamic. The Modern aspect is the feature-set
included to enable ease of use and flexibility- Master
Volume, series FX Loop, Extra overdrive for those hot modded
sounds, onboard Reverb and a New frequency selective pre-amp
topology to facilitate tonal tailoring for specific instruments and
musical styles.
Marshall 2266
Specifications
- Output(RMS): 50
Watts
- Pre-amp
Valves: 4 X ECC83
- Power
Amp Valves: 4 X KT66
- Footswitch
(Supplied): PEDL-00041
- Dimensions
(mm): 750x310x230
- Weight
(kg): 22.5
| Product Code |
Description |
Attributes |
Price | |
| 2266 Vintage Modern head |
50 watt tube head |
|
$1,899.00
|
|
|
|
|