Acoustic 300 steel

Back

We currently have one only Acoustic variax 300 in stock at this price. It is finished in gloss natural and is sold with full manufacturers warranty.

LINE 6 VARIAX ACOUSTIC 300 STEEL MODELLING GUITAR WITH STEEL STRINGS

The Line 6 Variax Acoustic 300 Steel guitar offers extraordinary steel string acoustic tones inspired by the Line 6 Variax Acoustic 700 guitar, feedback resistance when gigging, and unique tone-shaping options for recording and performing guitarists. The Variax Acoustic 300 Steel has the ability to morph continuously from a tight small-bodied acoustic to a jumbo and all the body sizes in-between. As a bonus the Variax Acoustic 300 Steel has classic looks as well as being playable.

Turning a simple BODY control knob, the Variax Acoustic 300 Steel goes from a bright, small-bodied acoustic to a warm full-bodied jumbo and anywhere in between. Ambience can be added with the VERB slider, adding air to your tone without feedback. The middle COMP slider alters the compression level without the need to worry about comprssion ratios or thresholds. The MIC slider re-positions the virtual microphone closer or away from the soundhole, closer to emphasize lower frequencies. And no need to worry about feedback, as the mic is virtual. With the PROG button scroll through 10 presets, or save your settings from the BODY, VERB, COMP and MIC controls to a user selectable memory location. TUNE for an on-board chromatic tuner which mutes the output when tuning. VOL is a simple volume pot.

Included with the Line 6 Variax Acoustic 300 Steel is a custom TRS cable and XPS-mini that powers the Variax and outputs the Variax Acoustic 300 signal to the house PA system or your DAW recording setup's analogue input. The Variax Acoustic 300 Steel does not have an RJ45 jack to connect digitally to PODxt Live or Vetta II, and will not work with Variax Workbench software. Sorry, no left handed version of the Line 6 Variax 300 Steel.

LINE 6 VARIAX ACOUSTIC 300 STEEL MODELLING GUITAR FEATURES
Body Material: Mahogany with spruce top.
Neck Material: Mahogany with rosewood fingerboard.
Neck Joint: Bolt-on at the 12th fret.
Finish: Gloss poly body, matte poly neck (stain).
Binding: Single ply top, body, and edge.
Rosette: Small marquetry ring.
Inlays: None.
Scale Length: 25.9“/660mm.
Number of Frets: 19.
Nut Width: 2.050“/52mm.
Neck Depth: .860“/22mm.
Fingerboard Radius: 21“/530mm.
Bridge Material: Rosewood.
Bridge Type: Tie block.
Hardware Plating: Chrome.
Tuners: Sealed mini tuners.
Strings: Medium tension.
Accessories@ TRS cable, XPS mini, PS-2.
Outputs: Analogue audio on a standard ¼“ jack.
Onboard Power: 6 X AA batteries.
Finish: Natural Gloss.